Industrial Painting Contractors in Elgin
Allied has been an Elgin company since 2007, and the plants along Randall Road, Route 20 and the Fox River are where our industrial crews learned the trade. Plant interiors, structural steel, deck ceilings, tanks and machinery, blasted, primed and coated by Allied employees who leave from our shop on Hawthorne Street.
- Allied employees on every job, never subcontractors
- Nights, weekends and shutdown-window scheduling so your operation keeps running
- Licensed, insured and bonded, with certificates before we start
- Written scope and warranty with every estimate
Industrial painting services for Elgin buildings
Every service below is one we run with our own crews across Kane County. Pick the page that matches your building, or tell us what you have and we will walk it with you. The full service overview is on the industrial painting services page.
Plant and factory interiors
Walls, columns, mezzanines and structural steel painted around running lines, one bay or one shift at a time.
Industrial ceilings and decks
Corrugated deck, joists, ducts and piping sprayed from lifts with containment over the equipment below.
Abrasive and dustless blasting
Sand, crushed glass and dustless blasting to bare metal before priming, on tanks, machinery and steel.
Equipment, tanks and machinery
Production machines, silos, tanks and plow fleets primed and painted to a spec, often over a single weekend.
Concrete and CMU walls
Block and poured walls sealed and coated for washdown areas, corridors and exterior elevations.
Industrial floors
Pigmented epoxy, clear coat and 5S floor markings on slabs that take forklift traffic.
Working in Elgin
Elgin's industrial base is bigger than most people realize: precast and block plants in the parks off Randall Road and Route 20, older brick and steel manufacturing near the river and along Route 25, and food, plastics, metals and machining shops in between. We have painted inside many of them, and MKD Electric and Bucher Hydraulics on this page are two you can drive past.
Being local matters most on industrial work because the schedule is the job. A shutdown window at 5 AM on a Saturday, a recoat window that evening, a foreman who can be at the plant in ten minutes when the line manager calls: that is what an Elgin plant gets from an Elgin contractor.
- Phased schedules by floor, bay or elevation, with a written sequence you sign off on
- Night and weekend crews where a space cannot close
- Containment, floor protection and ventilation set up before the first gallon opens
- One foreman on site every day who answers to you
Industrial painting projects near Elgin
Real clients, with case studies you can read. Location and scope are as published on each project page.
MKD Electric
Interior painting plus clear and pigmented epoxy floors for an electrical contractor's shop.
See the project
Bucher Hydraulics
Exterior of a precast tilt-up building pressure washed, primed and painted.
See the project
International Paper
A 250-foot corrugated-container machine painted to match in IP blue, completed in one weekend.
See the projectWhat industrial painting costs in Elgin, and what changes the number
Industrial painting is priced on prep and access more than on gallons. Rust, mill scale, old lead-era coatings and oil-fogged steel each change the spec, and so does how much of the plant we can take offline at once.
- Surface condition: blast to bare metal, power-tool clean, or wash and scuff
- Access: lifts between machines, mezzanines, ceilings over live lines
- Shutdown windows: weekend, holiday or rolling one-bay-at-a-time schedules
- Coating spec: zinc-rich or epoxy primers, urethane or epoxy topcoats, food-safe or chemical-resistant where required
Estimates are free and come with a written scope, so you can compare bids line by line. Read our promise.
Get a written estimate
Questions Elgin building owners ask us
How quickly can you be at an Elgin plant?
Minutes. Our shop is at 11N240 N Hawthorne St. Estimates within the week; a crew inside your next shutdown window.
Can you paint over a running line?
Often, under containment and bay by bay. Where a line has to stop, we plan the window with you and staff to finish inside it.
Do you blast steel and equipment in Elgin?
Yes, on site or at our shop. Abrasive, crushed-glass and dustless blasting are in house, and the same crew primes and coats so bare metal never sits.
Do you work in food and regulated plants?
Yes. Food-safe, USDA-acceptable and wash-down rated systems, and scheduling around sanitation cycles, are standard on our food and beverage jobs.
What about the floors?
Epoxy, clear coat and 5S markings, from the same crews. See the Elgin industrial floor page linked below, or ask for one estimate covering both.
Serving Elgin and nearby
Elgin, South Elgin, the Dundees, Carpentersville, Gilberts, Pingree Grove, Bartlett and the Fox Valley.
Also in Elgin: commercial painting, industrial epoxy and clear-coat floors.
Industrial painting in other towns:
Talk to an estimator
Allied Painting Contractors, LLC
11N240 N Hawthorne St #2
Elgin, IL 60123
Phone: 847-429-4660
Hours: Monday to Saturday, 7 AM to 5 PM. Closed Sunday.
Send the building address and a few photos and we will come out, walk it with you, and send a written scope and price. No obligation.
Request an estimate