Industrial Painting Contractors in Hanover Park
Light manufacturing and distribution along Lake Street and Route 20 in Hanover Park, repainted inside and out by Allied's own crews on a schedule built around your shifts.
- Allied employees on every job, never subcontractors
- Nights, weekends and shutdown-window scheduling so your operation keeps running
- Licensed, insured and bonded, with certificates before we start
- Written scope and warranty with every estimate
Industrial painting services for Hanover Park buildings
Every service below is one we run with our own crews across Cook County. Pick the page that matches your building, or tell us what you have and we will walk it with you. The full service overview is on the industrial painting services page.
Plant and factory interiors
Walls, columns, mezzanines and structural steel painted around running lines, one bay or one shift at a time.
Industrial ceilings and decks
Corrugated deck, joists, ducts and piping sprayed from lifts with containment over the equipment below.
Abrasive and dustless blasting
Sand, crushed glass and dustless blasting to bare metal before priming, on tanks, machinery and steel.
Equipment, tanks and machinery
Production machines, silos, tanks and plow fleets primed and painted to a spec, often over a single weekend.
Concrete and CMU walls
Block and poured walls sealed and coated for washdown areas, corridors and exterior elevations.
Industrial floors
Pigmented epoxy, clear coat and 5S floor markings on slabs that take forklift traffic.
Working in Hanover Park
Hanover Park's industrial base is mid-size: machine shops, plastics, packaging and distribution buildings along Lake Street and in the parks off Barrington Road. Most run one or two shifts, which leaves real windows for painting if the contractor plans around them instead of asking you to shut down.
We are based in Elgin, twenty minutes west, so a Hanover Park plant gets the same responsiveness as a job on our own street: a walk-through this week, a crew when the window opens, and the same foreman from the first day to the last.
- Phased schedules by floor, bay or elevation, with a written sequence you sign off on
- Night and weekend crews where a space cannot close
- Containment, floor protection and ventilation set up before the first gallon opens
- One foreman on site every day who answers to you
Industrial painting projects near Hanover Park
Real clients, with case studies you can read. Location and scope are as published on each project page.
Bloomingdale Fire Dept
Both fire houses repainted, including the red apparatus-bay doors.
See the project
Haskris
Interior metal ceiling, masonry walls and steel columns, plus exterior brick and metal, in a manufacturing plant.
See the project
Bucher Hydraulics
Exterior of a precast tilt-up building pressure washed, primed and painted.
See the projectWhat industrial painting costs in Hanover Park, and what changes the number
Industrial painting is priced on prep and access more than on gallons. Rust, mill scale, old lead-era coatings and oil-fogged steel each change the spec, and so does how much of the plant we can take offline at once.
- Surface condition: blast to bare metal, power-tool clean, or wash and scuff
- Access: lifts between machines, mezzanines, ceilings over live lines
- Shutdown windows: weekend, holiday or rolling one-bay-at-a-time schedules
- Coating spec: zinc-rich or epoxy primers, urethane or epoxy topcoats, food-safe or chemical-resistant where required
Estimates are free and come with a written scope, so you can compare bids line by line. Read our promise.
Get a written estimate
Questions Hanover Park building owners ask us
How do you schedule around a two-shift plant?
We map the plant with you, then paint the areas that clear on each shift and save the ones that never clear for a weekend. The sequence is written into the scope before we start.
Can you repaint machine-shop walls with oil in the air?
Yes. Degreasing is the first step, and the coating is chosen for an oily environment. Painting over film is the failure we are hired to fix, not the one we cause.
Do you paint exteriors as well as interiors?
Both, and often in the same estimate: precast and block exteriors, dock doors and canopies outside; walls, columns, ceilings and equipment inside.
Do you handle equipment and machinery?
Yes, including blasting to bare metal where the spec needs it. The International Paper machine on our clients page was done over a single weekend.
Are your painters employees?
Yes. Every crew member is an Allied employee, under a foreman who is on site every shift.
Serving Hanover Park and nearby
Hanover Park, Bartlett, Streamwood, Roselle, Bloomingdale and Carol Stream.
Also in Hanover Park: industrial epoxy and clear-coat floors.
Industrial painting in other towns:
Talk to an estimator
Allied Painting Contractors, LLC
11N240 N Hawthorne St #2
Elgin, IL 60123
Phone: 847-429-4660
Hours: Monday to Saturday, 7 AM to 5 PM. Closed Sunday.
Send the building address and a few photos and we will come out, walk it with you, and send a written scope and price. No obligation.
Request an estimate