Industrial Painting Contractors in Elk Grove Village
The Elk Grove industrial park is the largest in the country, and its buildings are aging together: precast panels from the 1970s, steel and deck that has never been recoated. Allied's own crews repaint them inside and out while the plants keep running.
- Allied employees on every job, never subcontractors
- Nights, weekends and shutdown-window scheduling so your operation keeps running
- Licensed, insured and bonded, with certificates before we start
- Written scope and warranty with every estimate
Industrial painting services for Elk Grove Village buildings
Every service below is one we run with our own crews across Cook County. Pick the page that matches your building, or tell us what you have and we will walk it with you. The full service overview is on the industrial painting services page.
Plant and factory interiors
Walls, columns, mezzanines and structural steel painted around running lines, one bay or one shift at a time.
Industrial ceilings and decks
Corrugated deck, joists, ducts and piping sprayed from lifts with containment over the equipment below.
Abrasive and dustless blasting
Sand, crushed glass and dustless blasting to bare metal before priming, on tanks, machinery and steel.
Equipment, tanks and machinery
Production machines, silos, tanks and plow fleets primed and painted to a spec, often over a single weekend.
Concrete and CMU walls
Block and poured walls sealed and coated for washdown areas, corridors and exterior elevations.
Industrial floors
Pigmented epoxy, clear coat and 5S floor markings on slabs that take forklift traffic.
Working in Elk Grove Village
Elk Grove Village packs thousands of manufacturers into a few square miles next to O'Hare, most of them in precast tilt-up or block buildings that went up in the same two decades. That means the same failures show up street after street: chalked and salt-burned panel bases, open joints, rusting dock canopies, deck ceilings that have gone dark over forty years of production.
We have painted here for years. J & K Cabinetry on this page is a precast exterior a few blocks into the park. Our estimators know which primers bond to old precast and which do not, and our schedules are built around a plant that runs two shifts.
- Phased schedules by floor, bay or elevation, with a written sequence you sign off on
- Night and weekend crews where a space cannot close
- Containment, floor protection and ventilation set up before the first gallon opens
- One foreman on site every day who answers to you
Industrial painting projects near Elk Grove Village
Real clients, with case studies you can read. Location and scope are as published on each project page.
J & K Cabinetry
Exterior precast tilt-up panels primed and painted in the Elk Grove industrial park.
See the project
Curtiss-Wright
Exposed-deck ceiling painted over a working manufacturing floor with full containment.
See the project
Haskris
Interior metal ceiling, masonry walls and steel columns, plus exterior brick and metal, in a manufacturing plant.
See the projectWhat industrial painting costs in Elk Grove Village, and what changes the number
Industrial painting is priced on prep and access more than on gallons. Rust, mill scale, old lead-era coatings and oil-fogged steel each change the spec, and so does how much of the plant we can take offline at once.
- Surface condition: blast to bare metal, power-tool clean, or wash and scuff
- Access: lifts between machines, mezzanines, ceilings over live lines
- Shutdown windows: weekend, holiday or rolling one-bay-at-a-time schedules
- Coating spec: zinc-rich or epoxy primers, urethane or epoxy topcoats, food-safe or chemical-resistant where required
Estimates are free and come with a written scope, so you can compare bids line by line. Read our promise.
Get a written estimate
Questions Elk Grove Village building owners ask us
Can you paint the plant interior without a shutdown?
Usually. We work bay by bay with containment over equipment, or on the off shift. Where a full shutdown is cheaper for you, we say so and staff to finish inside the window.
What is the right coating for old precast in Elk Grove?
A masonry primer over repaired, resealed and properly cleaned panels, then a 100 percent acrylic or elastomeric topcoat. The base of the panel, where salt and sprinklers hit, is prepped hardest.
Do you paint deck ceilings over machinery?
Yes. Corrugated deck, joists, ducts and piping are sprayed from lifts with containment below, usually on nights or weekends so the floor stays in production by day.
Do you also do the floors?
Yes: epoxy, clear coat and 5S markings. See the Elk Grove Village industrial floor page linked below, or ask for both in one estimate.
Are you insured for work in a manufacturing plant?
Yes, licensed, insured and bonded, with certificates sent to your facility or EHS manager before we start.
Serving Elk Grove Village and nearby
Elk Grove Village, Itasca, Wood Dale, Bensenville, Schaumburg and the O'Hare industrial belt.
Also in Elk Grove Village: industrial epoxy and clear-coat floors.
Industrial painting in other towns:
Talk to an estimator
Allied Painting Contractors, LLC
11N240 N Hawthorne St #2
Elgin, IL 60123
Phone: 847-429-4660
Hours: Monday to Saturday, 7 AM to 5 PM. Closed Sunday.
Send the building address and a few photos and we will come out, walk it with you, and send a written scope and price. No obligation.
Request an estimate